Anyone built a XU1541 USB to CBM IEC adapter yet ?

Started by Mark Smith, August 01, 2007, 09:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Mark Smith

August 01, 2007, 09:00 PM
http://www.harbaum.org/till/xu1541/index.shtml

I'd be interested to know what the success rate and impressions of it are like.

Mark
------------------------------------------------------------------------------------------------------------------

Commodore 128, 512K 1750 REU, 1581, 1571, 1541-II, MMC64 + MP3@64, Retro-Replay + RR-Net and a 1541 Ultimate with 16MB REU, IDE64 v4.1 + 4GB CF :-)

Guest

#1
August 01, 2007, 11:58 PM
I have a few of the units built by Till.  They work well for transferring disk images, but individual file transfers are still a bit slow.  Spiro and WoMo are actively working on the software support in OpenCBM and it's getting better all the time.  Spiro is currently working on an update to the BIOS that will allow the device's BIOS to be updated over USB instead of via the AVR's serial port.  This will be a big help for people like myself who have installed one of these babies inside a 1541.
Print
Go Up Pages1
User actions