I have 2 of these ex-medical Sony monitors, the kids use one with their playstation 2,
and I get the other for my vintage equipment. I have a similar one, but only 13",
at my work bench.
These are really great: stereo audio amp (no speakers, just hookups for external speakers),
two comp/s-video inputs, and a RGB hookup that, until now, I had never tried.
The RGB has a proprietary d-sub 25 pin connector. With the
d-sub you can select either digital or analog input. The 13" has the same
connector, and I wanted to use it with a 128D that I am putting at the work
bench, so I got the pinouts from work for the monitor and set to work.
I had to try it on the big screen before I installed it at the bench.....
http://good-times.webshots.com/photo/2723955910102828028BASNYN
http://good-times.webshots.com/photo/2388173650102828028uvUTJc
Best of all, they were free!
-Brian
Quote from: Brian on November 17, 2008, 03:42 PM
I have 2 of these ex-medical Sony monitors, the kids use one with their playstation 2,
and I get the other for my vintage equipment.
My school had one of those, but when it went bad, they did not even try to repair it. i.e., they disposed of it.
Quote from: Brian on November 17, 2008, 03:42 PM
I have a similar one, but only 13", at my work bench.
I have two of the 13-inchers. I've only tried the composite on one, and the screen was purple. :-( I haven't tried out the other.
Quote from: Brian on November 17, 2008, 03:42 PM
The RGB has a proprietary d-sub 25 pin connector. With the
d-sub you can select either digital or analog input. The 13" has the same
connector, and I wanted to use it with a 128D that I am putting at the work
bench, so I got the pinouts from work for the monitor and set to work.
From where did you get the priprietary connector? Can you post a description of the pin-outs?
Wanting to see digital RGB on them,
Robert Bernardo
Fresno Commodore User Group
http://videocam.net.au/fcug
The Other Group of Amigoids
http://www.calweb.com/~rabel1/
Southern California Commodore/Amiga Network
http://www.sccaners.org/
Quote from: RobertB on November 17, 2008, 05:50 PM
From where did you get the priprietary connector? Can you post a description of the pin-outs?
Whoops, that was a bad choice of words on my part. "Proprietary" in the sense that
it is Sony's own pinout, not that the connector itself is proprietary. The connector is
the same 25-pin d-sub connector the computer industry has used for over 30 years.
Here are the pinouts:
Pin1: IBM Select (hi=ibm, lo=ttl)
Pin2: Audio select (hi=audio on pin 13, lo=audio on external inputs)
pin3: H. sync or comp. sync
pin4: blue
pin5: green
pin6: red
pin7 & 8: no connection
pin9: analog/digital select (hi=analog, lo=digital ttl)
pin 10: RGB/normal select (hi=rgb, lo=composite video from line a or b)
pin 11: V. sync
pin 12: Blanking (hi = rgb, lo = switches to line a/b composite)
pin 13: audio input (selected with pin 2, otherwise external inputs used)
pin 14: no connection
pins 15-24: ground
pin 25: ibm luminance signal
to select 'hi' on an input, just leave it open. to select 'lo' just jumper it to ground.
So my connector used pins 3,4,5,6,11, and 25. I took pin 9 to ground. You can
land the grounds from the commodore anywhere on pins 15-24.
BTW, this is a PVM-2030. Sony did make a set of speakers for this monitor, they
mounted on the sides, and would fold back when not needed. There was a set
on ebay a while ago (with a monitor, very heavy).
-Brian
Quote from: Brian on November 18, 2008, 12:31 AM
Pin1: IBM Select (hi=ibm, lo=ttl)
Pin2: Audio select (hi=audio on pin 13, lo=audio on external inputs)
pin3: H. sync or comp. sync
pin4: blue
pin5: green
pin6: red
pin7 & 8: no connection
pin9: analog/digital select (hi=analog, lo=digital ttl)
pin 10: RGB/normal select (hi=rgb, lo=composite video from line a or b)
pin 11: V. sync
pin 12: Blanking (hi = rgb, lo = switches to line a/b composite)
pin 13: audio input (selected with pin 2, otherwise external inputs used)
pin 14: no connection
pins 15-24: ground
pin 25: ibm luminance signal
to select 'hi' on an input, just leave it open. to select 'lo' just jumper it to ground.
So my connector used pins 3,4,5,6,11, and 25. I took pin 9 to ground. You can
land the grounds from the commodore anywhere on pins 15-24.
Thanks! Now I have the details to make the appropriate cable.
Truly,
Robert Bernardo
Fresno Commodore User Group
http://videocam.net.au/fcug
The Other Group of Amigoids
http://www.calweb.com/~rabel1/
Southern California Commodore/Amiga Network
http://www.sccaners.org/
Sweet! Now I have to ask, are those all your Mopars?
Quote from: Andrew Sutton on November 18, 2008, 12:57 PM
Sweet! Now I have to ask, are those all your Mopars?
HA! No, those were my father's. We sold most of them this summer, he doesn't have
as much energy as he used to. He did keep a pair of 440's (2 door and 4 door), plus
one mint New Yorker that isn't pictured.
BTW, the '50 Kenworth is sitting in my driveway!
Later-
Brian
Quote from: Andrew Sutton on November 18, 2008, 12:57 PM...are those all your Mopars?
Heh, I've always been a Ford man. :)
Truly,
Robert Bernardo
Fresno Commodore User Group
http://videocam.net.au/fcug
The Other Group of Amigoids
http://www.calweb.com/~rabel1/
Southern California Commodore/Amiga Network
http://www.sccaners.org/
No bailout = we'll all be Honda and Hyundai men in the future.
(I'm a former UAW member myself. 13.5 years.)
Quote from: airship on November 20, 2008, 01:48 AM...we'll all be Honda and Hyundai men in the future.
Heh, one of my matchmaking friends wants me to buy a new Ford Mustang, thinking that females will come flocking. My response -- but it can't hold enough Commodore/Amiga/school gear! :D
Thinking of those car payments and insurance rates,
Robert Bernardo
Fresno Commodore User Group
http://videocam.net.au/fcug
The Other Group of Amigoids
http://www.calweb.com/~rabel1/
Southern California Commodore/Amiga Network
http://www.sccaners.org/
Quote from: RobertB on November 20, 2008, 06:23 PMMy response -- but it can't hold enough Commodore/Amiga/school gear! :D
Sounds like you need a Ford Excursion! ;)
Quote from: RobertB on November 20, 2008, 06:23 PM
Heh, one of my matchmaking friends wants me to buy a new Ford Mustang, thinking that females will come flocking.
Perhaps their thinking is that with a muscle car you'll be better able to catch fleeing females. ;D
Nah. In a bad economy, just having a steady job is the best aphrodisiac.
Quote from: Andrew Wiskow on November 20, 2008, 07:41 PMSounds like you need a Ford Excursion! ;)
Nah, I like looking at classic Ford Rancheros, or as Lord Ronin puts it, "a gentleman's pick-up". :)
Truly,
Robert Bernardo
Fresno Commodore User Group
http://videocam.net.au/fcug
The Other Group of Amigoids
http://www.calweb.com/~rabel1/
Southern California Commodore/Amiga Network
http://www.sccaners.org/
Quote from: RobertB on November 21, 2008, 06:32 PMNah, I like looking at classic Ford Rancheros, or as Lord Ronin puts it, "a gentleman's pick-up". :)
A classic car for hauling around classic computer gear... I can understand that. But I don't think a pick-up is the way to go... You need something with a top on it to keep everything dry in case you get stuck in the rain. Maybe a classic Winnebago is the way to go! ;)
(http://www.autoenginelube.com/images/525_1973winnebago1.jpg)
Quote from: Andrew Wiskow on November 22, 2008, 12:56 PM
But I don't think a pick-up is the way to go... You need something with a top on it to keep everything dry in case you get stuck in the rain.
Easy solution. A camper top or a tonneau cover. :)
Quote from: Andrew Wiskow on November 22, 2008, 12:56 PM
Maybe a classic Winnebago is the way to go! ;)
It's not a Ford (the smaller, older Winnebagos were built with Chrysler components). It also goes against my philosophy of the vehicle being "car-like".
Truly,
Robert Bernardo
Fresno Commodore User Group
http://videocam.net.au/fcug
The Other Group of Amigoids
http://www.calweb.com/~rabel1/
Southern California Commodore/Amiga Network
http://www.sccaners.org/
Quote from: RobertB on November 22, 2008, 02:47 PMEasy solution. A camper top or a tonneau cover. :)
There's an idea...
(http://cache.gawker.com/assets/images/jalopnik/2008/11/NPOCP-73RancheroCamper_494.jpg)
I think the hardest thing would be to find a Ford Ranchero in good condition...
Quote from: Andrew Wiskow on November 22, 2008, 03:30 PMI think the hardest thing would be to find a Ford Ranchero in good condition...
That's why you rebuild/restore... whether it's a Ford or a Commodore.
Now in San Jose for tomorrow's TOGA meeting,
Robert Bernardo
Fresno Commodore User Group
http://videocam.net.au/fcug
The Other Group of Amigoids
http://www.calweb.com/~rabel1/
Southern California Commodore/Amiga Network
http://www.sccaners.org/
An El Camino might do the trick as well!
Quote from: Andrew Sutton on November 24, 2008, 12:21 PM
An El Camino might do the trick as well!
Yeah, I look at El Caminos, but they aren't Fords.
Give me a good, old 302 or 351 V8,
Robert Bernardo
Fresno Commodore User Group
http://videocam.net.au/fcug
The Other Group of Amigoids
http://www.calweb.com/~rabel1/
Southern California Commodore/Amiga Network
http://www.sccaners.org/