Hi!
In my new version of C128 System Information 7.3 revision 1 is one problem with detection of speed of SCPU/8502
/8502 correct peek(53296)-251) = MHz
/65816 at 1MHz peek(53424)=65 / 20MHz peek(53424)=1 > correct
/65816 if 8502=2MHz >incorrect - always 20MHz: peek(53424)=1
Exists other address than 53424 where to check SCPU Turbo on/off?
I know this:
poke53370,0 to slow down 1mhz
poke53371,0 to speed up 20mhz
but peek is always 255
If can anybody help, please write.
Many many thanks!
Miro